AMGO 408-HP High-Profile Deluxe Four Post Parking Lift – 8,000-lb Capacity
AMGO 408-HP High-Profile Deluxe Four Post Parking Lift – 8,000-lb Capacity
AMGO 408-HP: A high-profile deluxe 8,000-lb. four post parking lift with 14 inches of additional lifting height, dual direct-drive cylinders, concealed single-point safety release and tall-vehicle parking clearance.
About the AMGO 408-HP
The AMGO 408-HP is the high-profile version of the deluxe 408-P parking lift. It retains the wider entrance, longer platforms and commercial-grade construction of the 408 series while adding approximately 14 inches of lifting height.
The increased vertical clearance makes it easier to park compatible SUVs, pickups and other tall vehicles beneath the raised platform. Its compact four post layout is suitable for residential garages, storage facilities and professional parking applications.
Key Features
- 8,000-lb. lifting capacity supports compatible passenger vehicles, SUVs and light trucks.
- High-profile configuration adds approximately 14 inches of lifting height over the standard 408-P.
- 87 11/16-inch maximum lifting height creates additional clearance for taller vehicles underneath.
- Dual hydraulic direct-drive cylinders provide dependable lifting power.
- Patented concealed safety-lock control keeps the release mechanism protected and neatly integrated.
- Manual single-point lock release simplifies controlled lowering without an external air source.
- Double safety-lock system provides additional protection while the platform is raised.
- Aero-standard lifting cables support coordinated platform movement.
- Reinforced double-shaped columns increase structural strength and stability.
- Non-slip platforms and foldable ramps support easier vehicle loading and parking.
- Back-to-back installation support helps maximize available parking space.
- Flexible power-column placement allows installation at any corner of the lift.
Recommended Applications
SUV and Pickup Parking
The additional lifting height creates more clearance for many compatible tall vehicles parked underneath.
Residential Garage Storage
Increase indoor parking capacity where ceiling height, floor strength and bay dimensions are suitable.
Commercial Parking Facilities
The deluxe high-profile construction supports professional vehicle-storage and display applications.
AMGO 408-HP Specifications
| Specification | Reference | 408-HP Details |
|---|---|---|
| Model | - | 408-HP High-Profile Deluxe Four Post Parking Lift |
| Lifting Capacity | - | 8,000 lbs |
| Lifting Time | - | 114 seconds |
| Overall Length Including Ramps | A | 208 1/16" |
| Outside Edge of Crossbeams | B | 167 5/8" |
| Overall Width | C | 102 1/2" |
| Width Between Posts | D | 92 13/16" |
| Maximum Lifting Height | E | 87 11/16" |
| Maximum Locking Height | - | 84 15/16" |
| Overall Height | F | 96 5/8" |
| Minimum Height | G | 5 11/16" |
| Maximum Underneath Height | H | 82 15/16" |
| Maximum Lock Height Under Runway | - | 80 3/16" |
| Drive-Through Clearance | I | 81 5/8" |
| Width Between Runways | J | 37" |
| Outside Edge of Runways | K | 74 7/16" |
| Gross Weight | - | 1,669 lbs |
| Motor | - | 1.0 HP, 110V / 60Hz |
Installation note: Install and operate the 408-HP on a flat, level concrete surface according to the official AMGO manual. Confirm ceiling height, upper- and lower-vehicle clearances, electrical supply, anchoring requirements where applicable, bay dimensions and all local building and safety requirements before installation.
Standard and Optional Equipment
- Two foldable drive-on ramps included as standard — Part No. 1104533025C-01.
- Standard pull rope for convenient safety-lock operation.
- Standard 90-degree motor installation plate — Part No. 40802.
- Optional caster kit with four casters — Kit No. 40801.
- Optional plastic oil-tray set with four trays — Kit No. 40806.
- Optional extended aluminum drive-in ramps — Part No. 40815; two required.
- Optional adjustable jack tray — Part No. 40816.
- Optional motor protective cover with emergency-stop switch — Kit No. 40810.
- Optional rubber wheel chock — Part No. 40811.
- Optional storage wave panels — Kit No. 40812.
- Optional J5H hand-pump sliding jack with 2.5-inch adapters — 5,000-lb. capacity.
Why Choose the AMGO 408-HP?
- Deluxe commercial-grade 8,000-lb. parking capacity.
- Approximately 14 inches more lifting height than the 408-P.
- Ideal for parking many compatible SUVs and pickups underneath.
- Concealed single-point release requires no external compressed air.
- Double safety locks provide additional protection.
- Optional casters and sliding jack expand flexibility.
Every AMGO Car Lift Is Guaranteed
Every AMGO car lift is delivered with a user manual containing detailed installation and maintenance guidelines, easy-to-follow troubleshooting guidance and an official warranty card. These resources support seamless installation, smooth day-to-day operation and uncompromising workplace safety.
AMGO 5-3-2 Warranty: Industry-Leading Service
AMGO Hydraulic Corporation supports its automotive lifts with comprehensive warranty coverage:
Product Overview
The AMGO 408-HP combines the deluxe 408-series platform with approximately 14 inches of additional lifting height. Its dual direct-drive cylinders, concealed manual release, double safety locks, foldable ramps and tall-vehicle clearance make it a practical parking solution for SUVs, pickups and passenger vehicles in suitable residential and commercial facilities.
Before purchasing or operating the lift, verify upper- and lower-vehicle dimensions and weight, ceiling and drive-through clearances, concrete and electrical requirements, available parking space and all applicable building and workplace safety regulations.