AMGO RJ-8A Pneumatic Rolling Jack – 8,000-lb Capacity
AMGO RJ-8A Pneumatic Rolling Jack – 8,000-lb Capacity
AMGO RJ-8A: A commercial-grade 8,000-lb. pneumatic rolling jack with patented floating roller technology, reinforced scissors construction, telescoping arms, an adjustable sliding base, two mechanical lock positions and stackable 2.5-inch and 5-inch adapters.
About the AMGO RJ-8A
The AMGO RJ-8A is a heavy-duty pneumatic rolling jack designed for compatible four post and scissors lifts in commercial workshops and well-equipped home garages. Its reinforced scissors structure and 8,000-lb. lifting capacity support wheel-free service on a wide range of compatible passenger vehicles and pickups.
Patented floating roller technology helps the jack glide smoothly along suitable lift rails and settle securely into the runway groove during lifting. Telescoping arms and an adjustable lower sliding assembly provide broad compatibility with different runway spacing and vehicle support-point layouts.
Key Features
- 8,000-lb. lifting capacity supports wheel-free service on compatible passenger cars, pickups and light-duty vehicles.
- Commercial pneumatic-hydraulic pump provides convenient air-powered lifting with a high-pressure extended hose.
- Patented floating roller system helps the jack glide smoothly and sit securely in compatible runway grooves.
- Reinforced solid scissors structure improves strength and stability under demanding workshop loads.
- Telescoping extendable arms help position the pads beneath manufacturer-approved vehicle support points.
- 34 7/16-inch to 56-inch arm-pad reach accommodates a broad range of compatible chassis widths.
- Adjustable lower sliding assembly fits runway spacing from 36 inches to 56 1/2 inches.
- Two solid mechanical lock positions provide secure and comfortable wheel-service heights.
- Drop-in rubber-pad assemblies provide dependable chassis contact.
- Stackable 2.5-inch and 5-inch adapters increase reach for pickups and higher-seated passenger vehicles.
- Dedicated adapter-storage bracket keeps extension components organized near the jack.
- Ergonomic guardrail protects the hydraulic hose and assists with movement along the runways.
Recommended Applications
Wheel-Free Service
Raise vehicles by approved chassis points for brake, tire, wheel-bearing and suspension repairs.
Four Post Service Lifts
The adjustable support base fits many compatible commercial four post runway configurations.
Heavy-Duty Scissors Lifts
The reinforced structure and floating roller system support compatible alignment and general-service scissors lifts.
AMGO RJ-8A Specifications
| Specification | Reference | RJ-8A Details |
|---|---|---|
| Model | - | RJ-8A Pneumatic Rolling Jack |
| Lifting Capacity | - | 8,000 lbs |
| Lifting Time | - | 50 seconds |
| Arm-Pad Reach | A | 34 7/16" to 56" |
| Minimum Jack Height | B | 10 11/16" |
| Adjustable Support-Base Width | C | 36" to 56 1/2" |
| Minimum Rubber-Pad Height | D | 10 7/8" |
| Maximum Height Without Adapters | E | 21 3/16" |
| Maximum Height With Adapters | - | 28 11/16" |
| Overall Width | F | 21 3/4" |
| Air Pressure | - | 0.8 MPa |
| Gross Weight | - | 397 lbs |
| Pump | - | Pneumatic hydraulic pump |
Compatibility and operation note: Confirm the host lift's runway spacing, rail design, structure and rated capacity before installing the RJ-8A. Supply clean, regulated compressed air at approximately 0.8 MPa and follow the official manual for installation and maintenance. Position the pads beneath approved support points and lower the jack onto a mechanical safety lock before service.
Standard Equipment
- Commercial-grade pneumatic-hydraulic pump with high-pressure extended hose.
- Patented floating roller assemblies with protective housings.
- Reinforced heavy-duty scissors structure.
- Telescoping long-reach lifting arms.
- Adjustable lower sliding support assembly.
- Manual safety-lock system with two solid lock positions.
- Drop-in rubber-pad assemblies.
- Stackable 2.5-inch and 5-inch extension adapters.
- Customized adapter-storage bracket.
- Ergonomic guardrail and hydraulic-hose protection.
Why Choose the AMGO RJ-8A?
- Heavy-duty 8,000-lb. wheel-free lifting capacity.
- Pneumatic pump reduces manual effort during frequent service work.
- Patented floating rollers support smooth runway movement.
- Adjustable arms and base provide broad lift compatibility.
- Reinforced scissors structure improves stability under load.
- Two adapter heights support low and high chassis vehicles.
Every AMGO Lift Is Guaranteed
Every AMGO lift and rolling jack is supplied with a user manual containing installation, operation, maintenance and troubleshooting guidance. Following these instructions supports reliable daily operation and safer wheel-free service.
AMGO 5-3-2 Warranty: Industry-Leading Service
AMGO Hydraulic Corporation supports its lifting equipment with comprehensive warranty coverage:
Product Overview
The AMGO RJ-8A combines an 8,000-lb. capacity with pneumatic hydraulic operation, patented floating rollers and reinforced scissors construction. Its telescoping arms, adjustable support base, two safety-lock positions, rubber pads and stackable 2.5-inch and 5-inch adapters make it a versatile wheel-free service accessory for compatible four post and scissors lifts.
Before purchasing or operating the jack, verify host-lift compatibility, runway spacing and capacity, compressed-air supply, vehicle weight and approved lifting points, available clearance and all applicable workshop safety requirements.