AMGO RJ-10A Pneumatic Rolling Jack – 10,000-lb Capacity
AMGO RJ-10A Pneumatic Rolling Jack – 10,000-lb Capacity
AMGO RJ-10A: A heavy-duty 10,000-lb. pneumatic rolling jack for compatible four post and scissors lifts rated above 18,000 pounds, featuring reinforced scissors construction, patented floating rollers, telescoping arms, dual lock positions and stackable 2.5-inch and 5-inch adapters.
About the AMGO RJ-10A
The AMGO RJ-10A is a heavy-duty pneumatic rolling jack designed for compatible four post and large scissors lifts with capacities exceeding 18,000 pounds. Its reinforced solid-steel scissors structure and 10,000-lb. rating support demanding wheel-free service on compatible passenger vehicles, pickups and commercial-duty vehicles.
Patented floating roller technology helps the jack travel smoothly along suitable lift rails and settle securely into the runway groove during lifting. Telescoping arms, an adjustable lower sliding assembly and standard stackable adapters provide broad compatibility with different runway spacing and approved vehicle support points.
Key Features
- 10,000-lb. lifting capacity supports wheel-free service on compatible heavy passenger and commercial-duty vehicles.
- Designed for lifts above 18,000 lbs when runway spacing, rail design and host-lift ratings are compatible.
- Pneumatic-hydraulic pump provides convenient air-powered lifting for frequent commercial use.
- Reinforced solid-steel scissors structure improves strength and stability under demanding loads.
- Patented floating roller device allows smooth movement while seating securely in compatible runway grooves.
- Extendable long-reach arms help position pads beneath manufacturer-approved vehicle support points.
- 34 5/8-inch to 62 3/8-inch arm-pad reach accommodates a broad range of compatible chassis widths.
- Adjustable lower sliding assembly fits runway spacing from 36 inches to 56 1/2 inches.
- Two manual safety-lock positions provide secure and comfortable wheel-service heights.
- Super-durable rubber-pad assemblies provide dependable chassis contact.
- Stackable 2.5-inch and 5-inch adapters increase lifting reach for higher vehicle support points.
- Ergonomic guardrail protects the hydraulic hose and assists with moving the jack.
Recommended Applications
Heavy Wheel-Free Service
Raise compatible vehicles by approved chassis points for brake, tire, axle, bearing and suspension work.
Heavy-Duty Four Post Lifts
The RJ-10A is intended for compatible four post lifts with capacities exceeding 18,000 pounds.
Large Scissors Lifts
The adjustable base and reinforced structure support compatible commercial alignment and general-service scissors lifts.
AMGO RJ-10A Specifications
| Specification | Reference | RJ-10A Details |
|---|---|---|
| Model | - | RJ-10A Pneumatic Rolling Jack |
| Lifting Capacity | - | 10,000 lbs |
| Lifting Time | - | 50 seconds |
| Arm-Pad Reach | A | 34 5/8" to 62 3/8" |
| Minimum Jack Height | B | 11" |
| Adjustable Support-Base Width | C | 36" to 56 1/2" |
| Minimum Rubber-Pad Height | D | 11 3/16" |
| Maximum Height Without Adapters | E | 21 1/2" |
| Maximum Height With Adapters | - | 29" |
| Overall Width | F | 21 3/4" |
| Air Pressure | - | 0.8 MPa minimum |
| Gross Weight | - | 467 lbs |
| Pump | - | Pneumatic hydraulic pump |
Compatibility and operation note: Confirm the host lift's runway spacing, rail design, structure and rated capacity before installing the RJ-10A. The official manual requires an air source above 0.8 MPa and an oil-water separator in the air supply. Position the pads beneath manufacturer-approved support points and lower the jack onto a mechanical safety lock before service.
Standard Equipment
- Commercial-grade pneumatic-hydraulic pump with high-pressure hose.
- Patented floating roller assemblies.
- Reinforced heavy-duty solid-steel scissors structure.
- Extendable long-reach lifting arms.
- Adjustable lower sliding support assembly.
- Manual safety-lock system with two lock positions.
- Super-durable drop-in rubber-pad assemblies.
- Stackable 2.5-inch and 5-inch extension adapters.
- Customized adapter-storage bracket.
- Ergonomic guardrail and hydraulic-hose protection.
Why Choose the AMGO RJ-10A?
- Heavy-duty 10,000-lb. wheel-free lifting capacity.
- Designed for compatible lifts exceeding 18,000-lb capacity.
- Pneumatic pump reduces manual effort during frequent service work.
- Patented floating rollers support smooth runway movement.
- Long-reach arms accommodate wide chassis configurations.
- Two adapter heights support varied vehicle support points.
Every AMGO Lift Is Guaranteed
Every AMGO lift and rolling jack is supplied with a user manual containing installation, operation, maintenance and troubleshooting guidance. Following these instructions supports reliable daily operation and safer wheel-free service.
AMGO 5-3-2 Warranty: Industry-Leading Service
AMGO Hydraulic Corporation supports its lifting equipment with comprehensive warranty coverage:
Product Overview
The AMGO RJ-10A combines a 10,000-lb. capacity with pneumatic hydraulic operation, patented floating rollers and reinforced scissors construction. Its long-reach arms, adjustable support base, two safety-lock positions, durable rubber pads and stackable 2.5-inch and 5-inch adapters make it a capable wheel-free service accessory for compatible heavy-duty four post and large scissors lifts.
Before purchasing or operating the jack, verify host-lift compatibility, runway spacing and capacity, compressed-air supply, vehicle weight and approved lifting points, available clearance and all applicable workshop safety requirements.