AMGO PRO-12A Alignment Four Post Lift – 12,000-lb Capacity

AMGO PRO-12A Alignment Four Post Lift – 12,000-lb Capacity

$7,180.00
Skip to product information
AMGO PRO-12A Alignment Four Post Lift – 12,000-lb Capacity
  • AMGO PRO-12A Alignment Four Post Lift – 12,000-lb Capacity
  • AMGO PRO-12A Alignment Four Post Lift – 12,000-lb Capacity
  • AMGO PRO-12A Alignment Four Post Lift – 12,000-lb Capacity
  • AMGO PRO-12A Alignment Four Post Lift – 12,000-lb Capacity
  • AMGO PRO-12A Alignment Four Post Lift – 12,000-lb Capacity
  • AMGO PRO-12A Alignment Four Post Lift – 12,000-lb Capacity
  • AMGO PRO-12A Alignment Four Post Lift – 12,000-lb Capacity
  • AMGO PRO-12A Alignment Four Post Lift – 12,000-lb Capacity
  • AMGO PRO-12A Alignment Four Post Lift – 12,000-lb Capacity
  • AMGO PRO-12A Alignment Four Post Lift – 12,000-lb Capacity
AMGO PRO-12A Alignment Four Post Lift – 12,000-lb Capacity

AMGO PRO-12A Alignment Four Post Lift – 12,000-lb Capacity

$7,180.00

AMGO PRO-12A: A commercial-grade 12,000-lb. alignment four post lift with integrated rear slip plates, adjustable turnplate pockets, stepless runway-width adjustment and air-released mechanical safety locks.

Lifting Capacity12,000 lbs
Service ModelAlignment Service
Lifting Time63 Seconds
Lift TypeFour Post Lift
Download Product Manual Download Product Brochure

About the AMGO PRO-12A

The AMGO PRO-12A combines the proven commercial construction of the PRO-12 with integrated alignment equipment for high-volume wheel service and daily automotive maintenance. Its 12,000-lb. capacity accommodates many compatible cars, SUVs, pickups and vans.

Integrated rear slip plates and adjustable turnplate pockets support specialized alignment work, while stepless runway-width adjustment helps the lift fit different vehicle wheel tracks and wheelbases.

Key Features

  • 12,000-lb. lifting capacity supports compatible cars, SUVs, pickups and vans.
  • Integrated rear slip plates support professional wheel-alignment procedures.
  • Adjustable turnplate pockets accommodate different vehicle wheelbases for specialized wheel service.
  • Stepless runway-width adjustment adapts to a broad range of vehicle wheel tracks.
  • Mechanical self-locking safety system uses an air-operated release for convenient lowering.
  • Primary multiple safety locks provide secure locking positions throughout the lifting range.
  • Cable-slack protection system comes standard for an additional level of operational safety.
  • Aircraft-standard lifting cables provide dependable cable-driven lifting performance.
  • High-standard hydraulic cylinder uses quality oil seals and a compensation valve.
  • Non-skid diamond runways improve tire grip during vehicle positioning and service.
  • ETL-certified AMGO power unit comes standard for dependable electrical and hydraulic operation.
  • Oil-water separator and solenoid air valve are installed on the power-side column.

Recommended Applications

Professional Alignment Shops

Integrated slip plates and adjustable turnplate pockets support precise two-wheel and four-wheel alignment work.

High-Volume Service Centers

The commercial build supports frequent alignment, inspection, maintenance and general automotive service tasks.

Mixed Vehicle Service

Stepless runway adjustment accommodates many compatible cars, SUVs, pickups and vans with different wheel tracks.

AMGO PRO-12A Specifications

Specification Reference PRO-12A Details
Model - PRO-12A Alignment Service Four Post Lift
Lifting Capacity - 12,000 lbs
Lifting Time - 63 seconds
Overall Length Including Ramps A 239 13/16"
Runway Length B 189 13/16"
Overall Width C 126 5/16"
Width Between Columns D 112 1/4"
Maximum Lifting Height E 76 3/8"
Maximum Lock Height to Top of Runway - 73 1/4"
Overall Height F 86"
Minimum Height G 8 11/16"
Maximum Underneath Height H 68 7/8"
Maximum Lock Height Underneath Runway - 65 3/4"
Drive-Through Clearance I 98 3/8"
Width Between Runways J 43 5/16", adjustable from 38" to 50 7/8"
Outside Edge of Runways K 83 5/16", adjustable from 78" to 90 7/8"
Minimum Four-Wheel Alignment Wheelbase L 81 3/4"
Maximum Four-Wheel Alignment Wheelbase M 166 5/16"
Maximum Two-Wheel Alignment Wheelbase N 167 5/8"
Gross Weight - 2,936 lbs
Motor - 2.0 HP, 220V / 60Hz, Single Phase

Installation note: Install the PRO-12A on a flat, suitable reinforced concrete foundation using qualified personnel. The official manual specifies concrete at least 4 inches thick with a minimum strength of 3,000 psi, a compressed-air supply of 0.5–0.8 MPa and electrical installation by a licensed electrician. Confirm all bay dimensions, anchoring and local safety requirements before installation.

Alignment Equipment and Optional Accessories

  • Integrated rear slip plates supplied for alignment service.
  • Adjustable turnplate pockets accommodate different wheelbases.
  • Optional turnplates — Kit No. 40101; two units are required for each alignment lift.
  • Optional 26-inch runway extension platform — Kit No. 41203.
  • Optional adjustable blocks for use with the runway extension — Kit No. 40905.
  • Optional air-line kit for rolling-jack operation — Kit No. 40102A.
  • Optional RJ-6H manual hydraulic rolling jack — 6,000-lb. capacity.
  • Optional RJ-6A pneumatic hydraulic rolling jack — 6,000-lb. capacity.

Why Choose the AMGO PRO-12A?

  • Commercial 12,000-lb. lifting capacity.
  • Integrated rear slip plates for wheel alignment.
  • Adjustable turnplate pockets fit different wheelbases.
  • Stepless runway-width adjustment fits various wheel tracks.
  • Air-released mechanical locks simplify operation.
  • Optional rolling jacks support wheel-free service work.

Every AMGO Car Lift Is Guaranteed

Every AMGO car lift is delivered with a user manual containing detailed installation and maintenance guidelines, easy-to-follow troubleshooting guidance and an official warranty card. These resources support seamless installation, smooth day-to-day operation and uncompromising workplace safety.

AMGO 5-3-2 Warranty: Industry-Leading Service

AMGO Hydraulic Corporation supports its automotive lifts with comprehensive warranty coverage:

5-Year WarrantySteel structure components
3-Year WarrantyHydraulic parts
2-Year WarrantyElectrical components, power unit and other covered parts
View Detailed Warranty Policy

Product Overview

The AMGO PRO-12A combines commercial four post lifting strength with integrated alignment functionality. Its rear slip plates, adjustable turnplate pockets, stepless runway-width adjustment, air-released safety locks and cable-slack protection make it a practical solution for high-volume alignment and general service facilities.

Before purchasing or operating the lift, verify vehicle dimensions and weight, wheelbase compatibility, reinforced concrete requirements, electrical and compressed-air supply, available bay dimensions and all applicable workplace safety regulations.

You may also like