AMGO MRL09 Mid-Rise Scissors Lift – 9,000-lb Capacity

AMGO MRL09 Mid-Rise Scissors Lift – 9,000-lb Capacity

$3,550.00
Skip to product information
AMGO MRL09 Mid-Rise Scissors Lift – 9,000-lb Capacity
  • AMGO MRL09 Mid-Rise Scissors Lift – 9,000-lb Capacity
  • AMGO MRL09 Mid-Rise Scissors Lift – 9,000-lb Capacity
  • AMGO MRL09 Mid-Rise Scissors Lift – 9,000-lb Capacity
  • AMGO MRL09 Mid-Rise Scissors Lift – 9,000-lb Capacity
  • AMGO MRL09 Mid-Rise Scissors Lift – 9,000-lb Capacity
  • AMGO MRL09 Mid-Rise Scissors Lift – 9,000-lb Capacity
  • AMGO MRL09 Mid-Rise Scissors Lift – 9,000-lb Capacity
  • AMGO MRL09 Mid-Rise Scissors Lift – 9,000-lb Capacity
AMGO MRL09 Mid-Rise Scissors Lift – 9,000-lb Capacity

AMGO MRL09 Mid-Rise Scissors Lift – 9,000-lb Capacity

$3,550.00

AMGO MRL09: A 9,000-lb. mid-rise scissors lift with dual two-stage drive-in ramps, extendable platforms, hydraulic synchronization and locking, and no external compressed-air requirement.

Lifting Capacity9,000 lbs
Lift TypeMid-Rise Scissors
Lifting Time30 Seconds
First-Stage Ramp Height2 3/8"
Download Product Manual Download Product Brochure

About the AMGO MRL09

The AMGO MRL09 is a 9,000-lb. mid-rise scissors lift designed for quick-service work involving compatible passenger cars, low-clearance vehicles, SUVs and light trucks. Its compact platform layout gives technicians practical access for tire, brake, suspension, body and detailing work.

An innovative two-stage runway design creates a low-profile entry from either direction. The extendable platforms accommodate different wheelbases, while the dual-cylinder hydraulic synchronization and locking system supports smooth, coordinated operation without an external compressed-air source.

Key Features

  • 9,000-lb. lifting capacity supports compatible passenger cars, SUVs, low-clearance vehicles and light trucks.
  • Two-stage drive-in ramps provide a discreet 2 3/8-inch first-stage entry for ultra-low chassis vehicles.
  • Dual-direction vehicle entry allows compatible vehicles to approach the lift from either side.
  • Extendable platforms adjust from 61 7/16 inches to 77 3/16 inches for different wheelbases.
  • Dual-cylinder hydraulic synchronization helps keep both platforms lifting evenly.
  • Hydraulic locking system provides secure operation without a separate compressed-air supply.
  • Thickened steel scissors provide a strong mid-rise lifting structure for professional use.
  • Surface-mount or flush-mount capability provides flexibility for different workshop layouts.
  • 24-volt safety control system supports safer day-to-day operation.
  • Low-level descent alarm sounds as the lift approaches the floor.
  • ETL-certified AMGO power unit comes standard.
  • 1 1/2-inch and 3-inch rubber pads are included as standard equipment.

Recommended Applications

Tire and Brake Service

The mid-rise design provides convenient access for wheel, brake and suspension work.

Low-Clearance Vehicles

The 2 3/8-inch first-stage ramp entrance helps accommodate many compatible low-profile cars.

Quick-Service Bays

The 30-second lifting time and dual-direction entry support efficient high-volume workshop workflows.

AMGO MRL09 Specifications

Specification Reference MRL09 Details
Model - MRL09 Mid-Rise Scissors Lift
Lifting Capacity - 9,000 lbs
Lifting Time - 30 seconds
Maximum Lifting Height A 47 1/4"
Minimum Platform Height B 5 9/16"
First-Stage Ramp Height C 2 3/8"
Overall Length Including Ramps D 156 11/16"
Overall Width E 76 3/4"
Width Between Runways F 29 1/2"
Adjustable Runway Length G 61 7/16" to 77 3/16"
Gross Weight - 1,821 lbs
Motor - 2.0 HP, 220V / 60Hz, Single Phase

Installation note: The MRL09 is approved for indoor use and may be configured for surface-mount or flush-mount installation. The official manual specifies level concrete at least 4 inches thick with a minimum strength of 3,000 psi and electrical work by a licensed electrician. Confirm all layout, anchoring, clearance and local safety requirements before installation.

Standard Equipment

  • Dual two-stage drive-in ramps for low-profile entry from either direction.
  • Extendable platforms for different vehicle wheelbases.
  • Dual-cylinder hydraulic synchronization and hydraulic locking system.
  • Low-level descent warning alarm.
  • ETL-certified AMGO power unit.
  • Standard 1 1/2-inch and 3-inch square rubber lifting pads.

Why Choose the AMGO MRL09?

  • Professional 9,000-lb. lifting capacity.
  • Fast 30-second lifting time.
  • Low 2 3/8-inch first-stage ramp entrance.
  • Extendable platforms support different wheelbases.
  • No external compressed-air source required.
  • Surface-mount or flush-mount installation flexibility.

Every AMGO Car Lift Is Guaranteed

Every AMGO car lift is delivered with a user manual containing detailed installation and maintenance guidelines, easy-to-follow troubleshooting guidance and an official warranty card. These resources support seamless installation, smooth day-to-day operation and uncompromising workplace safety.

AMGO 5-3-2 Warranty: Industry-Leading Service

AMGO Hydraulic Corporation supports its automotive lifts with comprehensive warranty coverage:

5-Year WarrantySteel structure components
3-Year WarrantyHydraulic parts
2-Year WarrantyElectrical components, power unit and other covered parts
View Detailed Warranty Policy

Product Overview

The AMGO MRL09 combines a 9,000-lb. capacity, fast 30-second lifting time and innovative two-stage runway entry in a versatile mid-rise scissors lift. Its extendable platforms, hydraulic synchronization, air-free locking and dual-direction entry make it a practical solution for quick-service and low-clearance vehicle applications.

Before purchasing or operating the lift, verify vehicle dimensions and weight, approved lifting points, floor and installation requirements, electrical supply, available working space and all applicable workplace safety regulations.

You may also like